Hi !

I have a ZX14R 2013....and after the 2012 model, the tail is different....and now it is very difficult to find bags or saddle bags for the bike...at least here in Brazil.

Any one can show some bags or saddle bags that fitted on zx 14 model 2013 and newer ?

thanks.

This works: https://zx14ninjaforum.com/messages.cfm?threadid=EF1DAEEA-C6FD-8338-435C1FC0E1D2B55E&post=75&page=2

* Last updated by: extrapolator on 6/30/2016 @ 9:13 PM *

Costamatrix,
you mentioned Givi part number TE4106 side frames. These frames are not available in the US. These side frames are for soft luggage. V35 Givi bags take a different frame.

Givi TE4106 SideFrame for Easylock Side Bags, or Soft Side Bags for Kawasaki ZX-14R/ZZR 1400

* Last updated by: doubleD on 10/17/2016 @ 9:31 PM *

Contact Twistedthrottle.com and see if they can ship parts to you.

I am using SW-Motech side case frames with Givi V35 luggage.
http://www.twistedthrottle.com/sw-motech-quick-lock-sidecarrier-kawasaki-zx14-zzr1400-contour-carrier-for-givi-v35-plx-cases-08-11

These are SW-Motech frames made for 2006-11 ZX14. They mount in the same locations for 2012-16 ZX14r. The only difference is the mufflers. Mufflers are larger in 2012. I lowered my mufflers with a 1-inch strap for clearance.

I started with soft luggage.

* Last updated by: doubleD on 10/17/2016 @ 9:42 PM *

+1 on the SW Motech racks. On previous Givi racks on my CBR1100XXs, the Givi parts turned out to be pretty junky and broke until I welded some support plates on. The SW Motech racks are much sturdier and work fine on the ZX14R, assuming you either lower the stock cans or use aftermarket ones. With my Scorpion Serket mufflers, I did not have to lower the pipes at all.

I'm helping a friend that has a 2013 zx-14R to find hard luggage. Just to be clear, to mount the Givi V35 side cases,
can someone send the link for a SW Motech mounting bracket that will work, because from what I see, everything seems to fit the '06-'11 model, and after that it seems to be discontinued. Or does it work fine with a 2013, if the stock cans are lowered slightly? thx.

zedx12r - Yes, the brackets and cases fit perfectly if the stock exhaust is lowered a little. That should be the only issue keeping SW Motech from stating they fit the ZX14R too.

Also, some (all?) aftermarket mufflers will allow the cases to fit without lowering them ... such as the Muzzy mufflers I have. The cases do sit close to the Muzzys, but they don't touch, plus Givi provides an insulation pad that you can choose to stick on to the bottom of each case. I did that, and haven't had a problem.

So you saying that these 2006-2011 brackets will fit the later ZX14R?

https://www.revzilla.com/motorcycle/sw-motech-quick-lock-evo-profile-side-case-racks-kawasaki-zx14r-2006-2011?gclid=CjwKEAjwjunJBRDzl6iCpoKS4G0SJACJAx-Vw4k7pSNOrzcnLMonr2ZHf6t2zfnoO6yc2qxSoQyJHBoC1WPw_wcB

Thx,
ominousone

Those look exactly like the ones on my 2012.

... and I see I paid $323 a couple years ago, so that's a better price.

Yes, the Gen1 SW Motech racks work great on the Gen2 ZX14R. Depending on your exhaust, you may need to drop them a smidge, but other than that good to go!

I'll know soon enough. I ordered the 300 Motech brackets, just to use with soft saddlebags to protect the paint. I have Delkevic 12" or 14" oval slip ons. Thanks for the info..

ominousone