I'm going to go get me some today.

It's dead as hell around here. At least post up some vids of your adventures Bad. I'm bored...

track was packed got 2 passes in 2.5 hrs and I was there when the gates opened. my new fueling system is mess up.

data log showed 18.0 afr @ 100 tps with a 25% duty cycle on WOT came back put a lot more fuel to it. and it did nothing same readings. I don't know why the injectors are not loading to 80% or so !!! going to put the old setup back in and get a baseline then reinstall 1 part at a time until I find the cause.

Damn... That really beats you down when you get limited passes and you're fighting electrical problems at the same time. Stay at it though and you'll get it nailed down. What track was that at?

San Antonio raceway . you not going to KOTT at Prescott AR

I can't travel that far. It's just not in my budget. Wish I could.

seem like my e85 after setting for 2 months with just starting the bike and light load cause stricken on the injectors to not open fully . I flushed with c16 and the injectors are working to full duty cycle now . in 6 years of e85 use this was the 1st that ever happen.

Wow. Yea the ethanol blend crap we have in MS will gum up a carb in less than 2 months. I would guess that an 85% ethanol content would go bad even quicker. Glad you got it figured out and didn't hurt the motor running that lean. Where are you getting the fuel? I can't find any local.

in Houston and Austin when I go I take a 40 gallon drum

if it had lean out on gas like that the motor would been toast . I'm sure I sand blasted the pistons and took a lot of life away but its still running

* Last updated by: Badzx14r on 8/23/2015 @ 9:45 PM *

I'd do a leak down and see what you have. You'd be doing yourself a favor if you caught a leaky valve or burnt rings ahead of time. Hell your motor deserves a freshen up after having to haul your big ass around all the time.

* Last updated by: maverick1441 on 8/24/2015 @ 5:21 PM *

ain't got time for all dat shit. going racing Saturday.

Pshhh.... 2 hours tops for a leak down big dog. That's plastic off, testing, plastic back on, and reapply the Plexus. Just don't want to see another 14R owner down and out.

Pshhh.... 2 hours tops for a leak down big dog

my leak down takes 5 minutes if its not blowing out the crank case vent its good to go.

Hey, on the bright side, I did go the quickest 60" and 330" last week. We had the Roadkill TV show come through our track on their way across the U.S. I had just got a seat pan and wasn't finished fitting it yet, but said screw it and went out with it anyway. First pass I ripped the bolts right out of the tail, but thankfully the seat stayed in place, so I zip tied it as best I could and the next pass I popped both zip ties right on the hit and almost completely lost my seat. lol. I was able to steal the longer bolts from the little belly pan below the lowering links and it stayed on after that. Man... i'll say when my seat came off it was quite embarrassing. but at least I was able to stand up on the pegs and slide it back down.

Here is the video of my 8.68 pass, I bobbled 5th, didn't let off the throttle enough and barely hit the rev limiter in 1st. I hit the rev limiter more that night than I ever have in a night. I don't know what my deal was.

8.68@152

* Last updated by: bgmagma10 on 8/26/2015 @ 2:39 PM *

It was funny how you couldn't hear his bike. Kinda like it wasn't even there.

Lol yeah, he still has the stock pipe on it. It's so quiet!

may be headed to the pmra race in Oct.

Hell yeah cool man!!!
I'll be there!

made 5 tuning passes Friday nite in 1 hour I love my pod 300

* Last updated by: Badzx14r on 8/30/2015 @ 9:44 PM *

Hell yeah man! I need to put a new clutch in before the race and hopefully be able to test that friday or saturday before. I was just lookin and it looks like there is a Diesel Drags saturday night, so I have a feeling the track is gonna be shit :-/

I'm testing at San Antonio Raceway this Friday nite . was at temple little river last Friday nite.

got a motorcycle race on sept 11th and 13th.

Hey Bad how far is Baton Rouge from you? Chris is putting on a race at State Capital the 26th of this month. Street ET, Pro ET, and 68" wheelbase street tire. I can dig up a flyer if your interested.

yeah dig up a flyer we always interested !!!

my shit is beginning to run good

I think there divisional races and grudgefest going on that weekend in dallas

* Last updated by: Badzx14r on 9/10/2015 @ 10:02 AM *

my bike holding together "all bugs worked out" ready for some racing now , cool weather and all.