YEP after reading my RAPID MAG, yesterday even though me boss said no more $$$$$$$$$$$$$$$ Ive ordered one from the STATES,checked up if a rock hitt it, A replacement radiator at $798 US was too much not to pay $90 to my door !

Good Move Bean!That's what I'mma talkin about.

HOW YER GOING BLUE AINT SEEN YER FER A FEW DAYS BUDDY

Ya...I've been here alright...makin friends as usual I'm likin yer license plate there Bean.Gotta get ya back on the 14 SOON! Fer God's sake...this time...BEHAVE will ya?

* Last updated by: blue07 on 9/23/2010 @ 1:47 AM *

THANKS blue ya must of seen this one

* Last updated by: bean07 on 10/6/2010 @ 6:05 PM *

COX RACING RADIATOR GAURD very quick international dealer turned up yesterday!! fitting this friday!!! hey blue "BEHAVE" Common mate "BOYS WILL BE BOYS"

* Last updated by: bean07 on 10/7/2010 @ 3:45 AM *

Hey Bean, When you get that radiator guard installed, can you take a few pictures and post them up? I've been thinking about buying one. It would be nice to see a few pictures of the install before I buy. I also want to install mesh screens around the open areas on the side fairings but I'm not sure how to attach them to the fairings. Thanks!

Hey Bean, When you get that radiator guard installed, can you take a few pictures and post them up? I've been thinking about buying one. It would be nice to see a few pictures of the install before I buy. I also want to install mesh screens around the open areas on the side fairings but I'm not sure how to attach them to the fairings. Thanks!

NO worries guys as soon as it's on I will take some pictures, bears I asked on another thread about the side mesh screens he said just use the twin 5 minute epoxy glue and no silicon, the silicon gets hot then the mesh will seperate,this is what he used from an order that came with his manufactured screens from the suplier hey bears you asked on the how to thread thats where scottjkyl answered you from mate

* Last updated by: bean07 on 10/7/2010 @ 5:29 PM *

HEY GUYS IT'S HARD TO GET AGOOD PICTURE THIS RADIATOR GUARD IS ON TOOK 45MINS. IM HAPPY WITH IT !!!

* Last updated by: bean07 on 12/1/2010 @ 9:56 PM *

Hey bean, yeah I saw that yesterday from scottjkyl on the How to section. I didn't get a chance to respond to that thread. I will today and thank scottjkyl. BTW, the radiator guard looks nice! Good job on the install.

by what means is the guard attached to the radiator? thanks

Thanks bearsZX72 Hey rich67 theres just 1 small 10m bollt down the bottem and just 2 cableties to the top there a bit awkard to get on just a bit tight to get in there mate, I think it"s good though istead of the possibility of say $798 to buy new radiator with labour and coolant ontop of that

I've been happy with my Cox guard, and with dual fans and Engine Ice she runs much cooler than stock.

Good choice, Bean!

Definately privateer $100 bucks allowing $20 fer delivery is cheap insurance for protecting are Radiators for sure !!

So BEAN...(nice install BTW)...when ya gonna get yer azz off the couch and get back to burnin up those Aussie Roads?

If yer well enough to type...you should be well enough to shift.

* Last updated by: blue07 on 10/9/2010 @ 12:09 AM *

Hopefully in a few weeks blue !! I have my first real phisio apointment monday but dont see if the bone is better till the 27th just less than 3 weeks away, but I do feel more positive that I may be riding at the end of this month as I have taken about 10 steps without using my crutch on the bad side with no pain, so im starting to see the light at the end of the tunnel The problem isn't changing gear it's bending my leg at only 55 degrees which isn't enough to sit down an get my leg on the footpeg yet, but im trying my best mate !

* Last updated by: bean07 on 10/9/2010 @ 5:17 PM *

Better picture of the rad/guard

* Last updated by: bean07 on 12/3/2010 @ 12:50 AM *

Your bike is HOPELESSLY BAD ASS!!!!!!!

OOOOOO YEH MATIE !Sizzling Hot Housten wer ready to "Launch"

Hey Bean, did you have to take off bodywork to get the rad guard installed, or just sneak it in?

didnt take the bodywork off I just had to manuvour it in, take a 10mm bolt out the bottem, rebolt it in then its akward to get in at the top just 2 cableties each side at the top! hey my mate used my bike last sunday, he went through a grasshopper plauge, then massive rain downpour on his way to my home, heres a picture when he was leaving 11am!!!!! weather on his way back!! when he put the bike in my shed!! it took only 5 minutes to totally clean the dead grasshoppers of the next morning with "no" damage to my radiator or coolling fins! and the rad guard came up like brand new!!

Installed mine last night, Nice mod. Only trouble I had was the wire ties up top. My big ass hands were a bit clumsy for this task!! lol Finally got things secured around the radiator mounts and all is well. Thanks for the info Bean!!

DEAD RIGHT !! kdii02 very hard to get the top bit LOL now !