so the headlights went out on my 06 14
When I turn the turn signals on they flash on the side selected but also the lights on the other side flash but very dimly...
the park lights stay on and back blinkers stay on..
I bought and replaced the following items and I am still having the same problem.
2 new relays in the front
1 new relay under the seat
1 brand new switch that mounts on the handlebar

it does a buzzin sound behind the dash panel.
any help fellas anyone have this problem before
Thanks a ton,
Darryl
rriowa@yahoo.com
SOMEONE HELP ME OUT PLEASE !!!!!!!!!!!

Bad Ground. Which side is not blinking? Take a wire long enough to go from winker base to chassis ground. YOu do not get shocked by D-C volts or current. House current will zip your wee-wee, not a spark to ground.

1. You either remove a bulb that was washed too many times is the condensation powder left in between the bulb and ground base = Poor Ground.
2. See that wire is about to make a new ground, you replaced or threw parts at it, when this is a ground not glowing that winker to pop the flasher = Bad Ground.
3. WATT is happening now is the flasher burst is hanging in that powder and if electricity wants to find ground fast, it is not going to a good ground = WATT he said.
4th = Variable is a ground you swap the whole bike and not A winker assembly being the cause is the call of the ball is watt I'm guessing?

i dont understand.. winker base what is that the base of the signal?
call me bro i relly need help
563-528-3991
Darryl