Move Close
Welcome to zx14ninjaform.com!

You are not logged in.
New Topic Reply
Next Page

Page: 1

Previous Page

Thread: Spring Arkansas Ride

Created on: 02/27/14 06:06 PM

Replies: 10

Danno


Danno's Gravatar

Location:

Southwestern Illinois

Joined: 12/18/11

Posts: 2142

Spring Arkansas Ride
02/27/14 6:06 PM

Thursday May 15th to Sunday May 18th.

We will be staying at the Edelweiss Inn, 2066 E. Van Buren, in Eureka Springs, Arkansas.

For reservations call 800-870-2529 or 479-253-7316 or go to http://edelweissinn.com/rooms.phtm

Rates:
Week days are 49.00 plus tax a day.
If you are staying 3 days, Thur, Fri, and Sat your weekend rate will be 54.00 plus tax a day
If you are checking in for Friday and Saturday your rate will be 59.00 plus tax a day.

We have until April 3, 2014 to make reservations. She has put all the rooms on hold for that weekend for the ZZR group so reserve early.

Cancellation policy is 2 or more days in advance
No Pets
No Smoking in rooms

When booking on line or on the phone make sure you tell them you are with the ZZR Group

Please use the ZZR Group discount.



'07 CPB Blue; ZGST windscreen with MRA X-screen adjustable spoiler, tube bar adaptor, PC III, ATRE,BMC air filter, modified stock seat with 2nd Look cover,Scorpion Flame Ti slip-ons, Galfer rotors front and rear, braided-stainless lines, C-F 10R front fender, C-F hugger, C-F inner fairing panels, painted foreman's fins with faux C-F inlay, polished rim lips wired for heated gear and accessories, Givi V35 side bags and E41 topcase with SW-Motech qd mounts

Link | Top | Bottom

Danno


Danno's Gravatar

Location:

Southwestern Illinois

Joined: 12/18/11

Posts: 2142

RE: Spring Arkansas Ride
05/12/14 2:36 PM

Coming up this weekend. 16 riders slated to show so far....



'07 CPB Blue; ZGST windscreen with MRA X-screen adjustable spoiler, tube bar adaptor, PC III, ATRE,BMC air filter, modified stock seat with 2nd Look cover,Scorpion Flame Ti slip-ons, Galfer rotors front and rear, braided-stainless lines, C-F 10R front fender, C-F hugger, C-F inner fairing panels, painted foreman's fins with faux C-F inlay, polished rim lips wired for heated gear and accessories, Givi V35 side bags and E41 topcase with SW-Motech qd mounts

Link | Top | Bottom

PaulAB


PaulAB's Gravatar

Location:

Chicago Metro, Far North

Joined: 02/12/09

Posts: 405

RE: Spring Arkansas Ride
05/12/14 10:48 PM

Danno,

You should have good weather for it; it looks like now, anyway! Sorry I can't make this one. Spring or Fall is surely the best times for Arkansas. I was down there in August once, heh-heh: never again!

Byt the time I had walked downstairs to my auto; I needed another shower. Fog over the rivers at night were great however and made a good setting for supper clubbing.

Hope you have a great meet.



Nothing is more responsible for the good old days than a bad memory. (Franklin Pierce Adams)

Link | Top | Bottom

Danno


Danno's Gravatar

Location:

Southwestern Illinois

Joined: 12/18/11

Posts: 2142

RE: Spring Arkansas Ride
05/14/14 5:35 AM

Thanks, Paul. It's a little wet here presently, but that's supposed to diminish as the weekend progresses. Got a friend coming here from Pa. today and then heading south in the morning after we meet with another rider. Taking back roads down, so it'll be 4 days of interesting roads. There are a few people already down there and some more heading down today. The main thing is everyone stays safe and has fun.



'07 CPB Blue; ZGST windscreen with MRA X-screen adjustable spoiler, tube bar adaptor, PC III, ATRE,BMC air filter, modified stock seat with 2nd Look cover,Scorpion Flame Ti slip-ons, Galfer rotors front and rear, braided-stainless lines, C-F 10R front fender, C-F hugger, C-F inner fairing panels, painted foreman's fins with faux C-F inlay, polished rim lips wired for heated gear and accessories, Givi V35 side bags and E41 topcase with SW-Motech qd mounts

Link | Top | Bottom

Danno


Danno's Gravatar

Location:

Southwestern Illinois

Joined: 12/18/11

Posts: 2142

RE: Spring Arkansas Ride
05/19/14 10:37 AM

A video of part of Friday's ride;

http://www.youtube.com/watch?v=AEY47NJUJqM#t=247

After Dave with the camera passes the other Dave and then Mark, he catches up to Will who is following me.



'07 CPB Blue; ZGST windscreen with MRA X-screen adjustable spoiler, tube bar adaptor, PC III, ATRE,BMC air filter, modified stock seat with 2nd Look cover,Scorpion Flame Ti slip-ons, Galfer rotors front and rear, braided-stainless lines, C-F 10R front fender, C-F hugger, C-F inner fairing panels, painted foreman's fins with faux C-F inlay, polished rim lips wired for heated gear and accessories, Givi V35 side bags and E41 topcase with SW-Motech qd mounts

Link | Top | Bottom

wfozx14


wfozx14's Gravatar

Location:

Upstate New York

Joined: 12/16/12

Posts: 891

RE: Spring Arkansas Ride
05/19/14 5:25 PM

Hey Danno I can't get your video to work, comes up as an error.



Ohlins forks,Ohlins shock,GPR steering damper, Brembo brake master cylinder/lever,Brembo clutch cylinder/lever,vortex rearsets, Two Bros carbon race series 4 into 1 exhaust,Dunlop Q3's,galfer ss brake/clutch lines, V1 radar detector,zumo 550 gps,auto com communication,PDM 60 power distribution module,zero gravity DB wind screen, vortex rear sprocket,EK zzz chain, Carpenter racing CCT, Romans flash, Annitori racing quickshifter.

Link | Top | Bottom

Danno


Danno's Gravatar

Location:

Southwestern Illinois

Joined: 12/18/11

Posts: 2142

RE: Spring Arkansas Ride
05/19/14 5:59 PM

I just copied and pasted the link into a new window and it worked.



'07 CPB Blue; ZGST windscreen with MRA X-screen adjustable spoiler, tube bar adaptor, PC III, ATRE,BMC air filter, modified stock seat with 2nd Look cover,Scorpion Flame Ti slip-ons, Galfer rotors front and rear, braided-stainless lines, C-F 10R front fender, C-F hugger, C-F inner fairing panels, painted foreman's fins with faux C-F inlay, polished rim lips wired for heated gear and accessories, Givi V35 side bags and E41 topcase with SW-Motech qd mounts

Link | Top | Bottom

wfozx14


wfozx14's Gravatar

Location:

Upstate New York

Joined: 12/16/12

Posts: 891

RE: Spring Arkansas Ride
05/19/14 7:13 PM

Still no luck, must be me or my computer. Anyway was it a good time?



Ohlins forks,Ohlins shock,GPR steering damper, Brembo brake master cylinder/lever,Brembo clutch cylinder/lever,vortex rearsets, Two Bros carbon race series 4 into 1 exhaust,Dunlop Q3's,galfer ss brake/clutch lines, V1 radar detector,zumo 550 gps,auto com communication,PDM 60 power distribution module,zero gravity DB wind screen, vortex rear sprocket,EK zzz chain, Carpenter racing CCT, Romans flash, Annitori racing quickshifter.

Link | Top | Bottom

Danno


Danno's Gravatar

Location:

Southwestern Illinois

Joined: 12/18/11

Posts: 2142

RE: Spring Arkansas Ride
05/20/14 11:42 AM

It was a hoot. Saturday sucked a little because we ran into fog and mist going up 16 and didn't come out of it until after lunch at The Cliff House when we came down the hill into Jasper. The only other bummer was BuilderWill's crash. As we approached the 16/21 intersection with me leading, a utility truck pulled in front of me and stopped. I stopped and then squirted around when he didn't go. Will came up and thought he was going to move by then, but he didn't. Will grabbed a handfull of brakes and washed out the front wheel on the snotty pavement. When the bike went down, it spit him off and into the back of the truck. A broken hand and some bruises plus damage to the bike. He rode it back to the hotel with a broken brake lever and then U-hauled it home.

Dave (with the GoPro), myself and Will rode good backroads all the way down and Dave and I rode them back, so it was 4 days of twisty roads for me. For Dave, add 2 days of slabbing back and forth between here and Pittsburg.


* Last updated by: Danno on 5/23/2014 @ 2:54 PM *



'07 CPB Blue; ZGST windscreen with MRA X-screen adjustable spoiler, tube bar adaptor, PC III, ATRE,BMC air filter, modified stock seat with 2nd Look cover,Scorpion Flame Ti slip-ons, Galfer rotors front and rear, braided-stainless lines, C-F 10R front fender, C-F hugger, C-F inner fairing panels, painted foreman's fins with faux C-F inlay, polished rim lips wired for heated gear and accessories, Givi V35 side bags and E41 topcase with SW-Motech qd mounts

Link | Top | Bottom

wfozx14


wfozx14's Gravatar

Location:

Upstate New York

Joined: 12/16/12

Posts: 891

RE: Spring Arkansas Ride
05/20/14 6:43 PM

Geez, Didn't Will crash last year as well? Hope he's okay.



Ohlins forks,Ohlins shock,GPR steering damper, Brembo brake master cylinder/lever,Brembo clutch cylinder/lever,vortex rearsets, Two Bros carbon race series 4 into 1 exhaust,Dunlop Q3's,galfer ss brake/clutch lines, V1 radar detector,zumo 550 gps,auto com communication,PDM 60 power distribution module,zero gravity DB wind screen, vortex rear sprocket,EK zzz chain, Carpenter racing CCT, Romans flash, Annitori racing quickshifter.

Link | Top | Bottom

Danno


Danno's Gravatar

Location:

Southwestern Illinois

Joined: 12/18/11

Posts: 2142

RE: Spring Arkansas Ride
05/23/14 2:54 PM

Yes he flopped it pretty hard last year. This was minor by comparison.



'07 CPB Blue; ZGST windscreen with MRA X-screen adjustable spoiler, tube bar adaptor, PC III, ATRE,BMC air filter, modified stock seat with 2nd Look cover,Scorpion Flame Ti slip-ons, Galfer rotors front and rear, braided-stainless lines, C-F 10R front fender, C-F hugger, C-F inner fairing panels, painted foreman's fins with faux C-F inlay, polished rim lips wired for heated gear and accessories, Givi V35 side bags and E41 topcase with SW-Motech qd mounts

Link | Top | Bottom


Welcome to zx14ninjaform.com!
 
New Topic Reply
Next Page

Page: 1

Previous Page

New Post

Please login to post a response.