Don’t see any how to’s on swapping out velocity stacks on the 14R. Couldn’t find any on the web. Any pointers or insight on how difficult this would be.

Thanks

I believe the stacks are twofold. One is the stack, the other is how it closes off the frame's holes to the air box. You'd have to find a stack so it goes into the frame to throttle body, then close off the stack's reach so as to close off the frame of the air box, or you'd be sucking in unfiltered air to the box.

Don't know if I explained it well enough, but you'd have to pull the OEM stack thru the frame to remove the throttle body.

https://www.ronayers.com/oemparts/a/kaw/5853081587a86609a0cd8533/air-cleaner