I have a cycle-logic kit from Dave. I need a map since I have a bazzaz Z-Fi and I also have the Auto tune Z-AMF. I try and ride it to get it mapped but no luck. When I put the computer on it is giving me under diagnostic error on STP. I see the RPM jumping up and down. I will use any map available and adjust my PSI to it. They must be under 8PSI, stock motor, with Ivan's TRE, not top Flies, Air Sensor chip, Fuel tower mod from Dave, Fuel regulator, oil pump, external waste-gate 8lb spring, boost controller, nothing is done to motor, will start no problem, but if I try and ride it, it will choke like missing gas, hooked the hose from the fuel regulator to the hose on the throttle body at the end on the brake side of the bike.(it's at the very end of the throttle body at the corner) I have to make sure that this is a vacuum hose. I just need help since this bike has been stopped since May 2010, I want to ride again. Thanks ahead of time. I did put a map that Dave gave me from a PC and put the numbers on my Bazzaz but no glory. if anyone wants to contact me private message my email is ninjarider2008 at yahoo dot com. someone help please.