Well I just did a track day after fitting in a PC3 this weekend just gone. Didn't have time to have it mapped before so it was running a standard map.
I had it on the dyno just today to check and fix the fuel mixture value and found on the first dyno run I was only pumping out 146.5 hp at 6750. Not good.
The guy on the dyno shifted the values around to stabilize the fuel air ration and only managed to screw it up to 153.2 hp at 9500.
The exhaust is a Boz Bros unit to which I'm not sure of the model. (maybe some-one could identify it in my avatar).
It seems maybe to be the problem. I'll post a closer pic later of the pipe.
Does anyone know where I can lay my hands on a map for this type of exhaust? 06 ZX14.
Could be either the exhaust is a waste of time or the guy running the dyno is having a few probs working it out.
Looking at my chart, there is a big move in power curve. Sure there's more power comming out...but...
I'll try scan the chart but for now.
Revs.....Pre Dyno work HP.....Post Dyno HP
2000........28...................24
3000........54...................32
4000........80...................52
5000........117..................71
6000........136..................93
7000........145..................121
8000........---..................135
9000........---..................150
9500........---..................153.2
10000.......---..................151
10500.......---..................147
Differences like these ring alarm bells to me.
I'd like to try a map close to suiting what I've got before buying a new pipe
can some-one help?
cheers,
Dave
* Last updated by: ninjadave on 12/8/2009 @ 5:52 AM *