A quick video I shot while the bike was on the dyno. The quickshifter is the HM Plus Lever on stock settings.

https://www.youtube.com/watch?v=Wx66C4nNew4

* Last updated by: WildPete on 2/8/2015 @ 5:58 PM *

Cool. Thanks for sharing vid!

Not a problem Rook. It was pleasant 32 degrees Fahrenheit out riding today.

* Last updated by: WildPete on 2/6/2015 @ 4:03 PM *

where did you purchase yours?

TUps, I purchased it from HM. I'll warn you now, HM has managed to screw up shipping. First time I got a box, it didn't come with the YK harness. It came with a RSV4 harness. Oh, and I wasn't supposed to get the shifter in the first place. I pulled out of our forum group buy.

Second shipment, my order. The shifter gets delivered to the shop. I ask them to check the box. No wire harness. They forgot to send it because they were catching up on back orders. I did get the harness next day and it was the right one.

Great product so far. HM Packaging/shipping division, not that stellar.

What are those rear sets your running. Or is it just an aftermarket shift lever? if so is it adjustable at all?

PJizz, The HM shifter is just a lever with toe peg. You keep your stock rearset.

Here's the link: ZX-14R Quick Shifter

PJizz, The HM shifter is just a lever with toe peg. You keep your stock rearset.

Now that's totally cool.Thanks for the vid Wild.

No problem Grn.

Just remember if anyone gets the shifter do not use it for 1-2 shifts. I never did this with my S1000RR with the stock QS. Talking with the tuner he mentioned that it's bad. Saying something along the lines the 1-2 shift for most gear boxes the required kill time is significantly longer than from 2nd to 3rd. I'm not an expert on this so since I never did this on the S1000RR I wouldn't do it with the HM shifter. With the tuner backing up my theory I guess I have been doing it right for a while.

i avoid quikshifting with my HM from 1 to 2 also. It seems to work fine from 1-2 at lower rpm but I don't want to risk banging any gears with all of the power there at peak rpm in first gear. Somefun was the one I initially heard express concerns about this. I followed his lead since I had already experienced missing a shift with the HM from 2-3.

* Last updated by: Rook on 2/8/2015 @ 6:25 AM *