Nope. I showed up right after Montana ran Blue07 off.

That f-n Blue was a real prick.Glad he's gone.

* Last updated by: Grn14 on 10/9/2014 @ 12:10 PM *

One thing Ivan said was you cannot adjust the accel with flash alone. Back to running a pig.

Ding ding we have a winner ... drummm rolllll please .... Hub has it ..

No-no! I knew that since day one: no accel map in the bin bring ups. I'm sure I mentioned it and signed off [comma] as you are not going to listen to me. But since Ivan mentioned it, figured when eat'inn hut'inn speaks?

Ding ding we have a winner ... drummm rolllll please .... Hub has it ..

That is hard to look at Hub.

+1

Follow the eye chart you want strained eyes...
Left side:
1. Subs safety wired open.
2. Two pc's
3. One autotuneable.
4. Four possible maps via toggles [wires dangling is one] follow [upper ram area] toggle. See pc toggle near both white female pc connectors I reach down and flip.
5. Extra ECU flashed using the Wooly bin is the decal over the pc and I can map in flash only [no pc].
6. *Did not do: Could backprobe and glue a pot style pig into the mother harness and run a 5th pig.

Right side:
1. One wideband running all the time or toggled off at the box.
2. One more wideband 02 connector at the bottom for autotune to work we swap connectors.
3. One [extra] Sub actuator sits outside (the stock t-body is left intact).
4. One jumper harness made so 3 crank sensor connectors are connected on the outside I pull over and swap pigs.
5. One too many computer wire harnesses are [fused], where the male to female connector says, who's pc/02 needs +/- to those boxes in green codes?
6. One wire out of that mess is not moved I need to sync the t-body.

Watt is the difference I have a trellis in place of that spiderweb on roids... Hem them roids that is.

Looks more like spaghetti to me.

Spaghetti for dinner I see lol

Here is the wine list, sir.
Tonight's hose special is, Rigear Tone Knee.

I prefer senor Lee Sag A Knee.

Sorry, no Sub-steer-two-shuns