Move Close
Welcome to zx14ninjaform.com!

You are not logged in.
New Topic Reply
Next Page

Page: 1 2

Previous Page

Thread: Pins & Needles

Created on: 01/13/13 12:57 AM

Replies: 38

martin61


martin61's Gravatar

Location:

Brisbane, Australia

Joined: 11/03/12

Posts: 197

Pins & Needles
01/13/13 12:57 AM

Hi Everyone,
Im hoping someone may have overcome this themselves before & may be able to give me some advice.
I am getting bad pins & needles in my fingers on both hands when riding.
It starts after about 15 minutes & slowly gets worse to the extent that after about 45 minutes I have to pull up.
It is also stopping me from going on longer rides because it is so uncomfortable.
I am only short 1.6m tall, I have tried 1 inch bar risers which made only the very slightest difference but I prefer the feel of the bike without them so I took them back off.

Any advice appreciated.

Dave



2013 Limited Edition, Brocks lowering links, Lowered 1" front & back, Puig carbon hugger,
Akropovic Headers, Leo Vince EVO2 carbon twin exhaust system, Radguard protector, Tinted Tail Light,
Zero Gravity DB screen, BMC air filter, Driven D-Axis grips, Full PIAA lights, Rated R 1" bar risers,
Stem GPS mount, 12v outlet, Rated R frame sliders, Carbon heel guards, Custon rear fender, Seat Cowel,
Custom shaped seat, Brocks billet Adj Sidestand, Custom ECU tune by Oz-Racing, HyperPro RSC Active Damper.

Link | Top | Bottom

bean07


bean07's Gravatar

Location: South Ozz

Joined: 08/02/10

Posts: 3181

RE: Pins & Needles
01/13/13 3:37 AM

G,day Dave im only 5'6" and although i dont suffer that i read another member privateer used these bar end inserts to relive that sort of thing maybe pm him im sure he can help ya with this mate cheers Stephen



2006 CBR1100xx with a few mods + V Star 1300A Cobra swept exhaust,Fi2000 EFI,Big air kit, Rad cover/Guard,Forward controls/pegs,Pillion mini boards,screen,rack,Saddleman seat a few chrome bits.

Link | Top | Bottom

Neilp


Neilp's Gravatar

Location:

Brisbane, Australia

Joined: 01/02/12

Posts: 350

RE: Pins & Needles
01/13/13 4:29 AM

Relax your grip usualy works, if that doesnt work try some soft foam grips. I might even have a set here if your interested, They are left over from my last bike, that had some vibration around 4000 - 4500 RPM wich just happened to be right in the 100 -120 Km/hr range. Anyhow Pm me if interested.


Neil



Penske 8983 Ohlins 20mm supersport valving Racetech 1.1 N/mm springs Powerbronze carbon hugger Akra headers Akrapovic titanium mufflers Muzzy sliders Cox rad guard Vortex rearsets Throttlemeister bar ends Zero Gravity DB screen A-Tech front carbon fender Hel SS braided brake lines Clever Wolf carbon tank guard DNA air filter MDI carbon ram tube covers Brock's/ Ohlins steering damper Driven fuel cap Ventura rack Driven D-Axis grips PIAA headlights Muzzy fender eliminator Bestem carbon battery cover Custom ECU tune.

Link | Top | Bottom

Padre



Joined: 08/29/12

Posts: 32

RE: Pins & Needles
01/13/13 9:21 AM

Good morning Dave. I am 6'6" and I used to have the same problem, I wasn't riding correct. There should be little to no weight on your wrists or the handle bars when you ride. Use your legs and torso to support your body when you ride. It will make all the difference when you start doing that.

Get the book or DVD twist of the wrist II by Keith Code. One of the better investments I've made.

Link | Top | Bottom

carabuser


carabuser's Gravatar

Joined: 09/05/12

Posts: 1731

RE: Pins & Needles
01/13/13 10:28 AM

I have the same problem, someone on this board told me to try Qwi nerve protection gloves, and they helped, but you still have to keep in mind your riding positon, weight on your wrists, etc ... but I noticed a big diference right away, don't know if it will work for you, I got mine on their website, QwiNerveProtector.com I think they are on ebay too.

Good luck, I know its a pain in the a$$, with such a nice bike to ride having your hands go numb, last time I had to pull over 2 or three times in a 1 hour span, dont know what I was doing wrong ....


* Last updated by: carabuser on 1/13/2013 @ 10:29 AM *



2012 ZX 14R, Cblast ECU Flash, (RECOMENDED !!!!) 2 Brother slipons, ZG marc 1 windscreen, yosh fender eliminator, Pazzo Levers, Powerbronze hugger, heli bars, competition werks footpegs, Throttlemeister Cruise Control, CF Heel Guards,

Predator Race Team #14
Hayabusa
1980 GS 1100
1978 GS 550
1968 CL 350
1972 TS 90
RM 125, YZ 250, CR 500. Taco 22 LOL !

"Socialism is a philosophy of failure,
the creed of ignorance, and the gospel of envy,
its inherent virtue is the equal sharing of misery.."
Winston Churchill

'The trouble with Progressive's is not that they're ignorant; it's just that they know so much that isn't so.' - Paraphrase of R.R.

Link | Top | Bottom

poppabear


poppabear's Gravatar

Location: las vegas, nv

Joined: 04/28/12

Posts: 57

RE: Pins & Needles
01/13/13 1:16 PM

I used to have my left hand go numb in a matter of about 20 minutes when riding. Turns out I had a muscle knot in my left back shoulder putting pressure on a nerve. It took about 10 visits with a masseuse and it went away.



1968 Yamaha Twin 100
1966 Honda CB 160
1968 Yamaha Twin 180
1968 Honda CL 350
1969 Honda CB 750
1976 Kawasaki KZ 900
1978 Kawasaki KZ 1000
1993 Kawasaki ZX 11
2012 Kawasaki ZX 14r (blue)

Link | Top | Bottom

Grn14


Grn14's Gravatar

Location: Montana

Joined: 02/25/09

Posts: 15511

RE: Pins & Needles
01/13/13 1:26 PM

Do you have stock bar end weights on there Martin?It does sound like weight being pushed on the wrong spot on yer wrist.Lighten yer grip as was mentioned...and grip with your thighs,get that weight off the bars(your upper torso).This works for some anyway.You can also get vibrations if those bar ends aren't heavy enough...may look into getting a beefier set?Sounds silly I know...but amazing how much tech stuff went into these bikes.


* Last updated by: Grn14 on 1/13/2013 @ 1:29 PM *

Link | Top | Bottom

martin61


martin61's Gravatar

Location:

Brisbane, Australia

Joined: 11/03/12

Posts: 197

RE: Pins & Needles
01/13/13 10:05 PM

Thanks for all your susgestions guy's, im sure between all of them I will get some relief.
I have also ordered a set of these which may help.
http://www.casporttouring.com/cst/motorcycle/ZX14/GPSMALL.html
Thanks Again

Dave



2013 Limited Edition, Brocks lowering links, Lowered 1" front & back, Puig carbon hugger,
Akropovic Headers, Leo Vince EVO2 carbon twin exhaust system, Radguard protector, Tinted Tail Light,
Zero Gravity DB screen, BMC air filter, Driven D-Axis grips, Full PIAA lights, Rated R 1" bar risers,
Stem GPS mount, 12v outlet, Rated R frame sliders, Carbon heel guards, Custon rear fender, Seat Cowel,
Custom shaped seat, Brocks billet Adj Sidestand, Custom ECU tune by Oz-Racing, HyperPro RSC Active Damper.

Link | Top | Bottom

Grn14


Grn14's Gravatar

Location: Montana

Joined: 02/25/09

Posts: 15511

RE: Pins & Needles
01/13/13 10:07 PM

Never tried em...lots of guys have and said they worked great...Good Luck with those....

Link | Top | Bottom

alg8er


alg8er's Gravatar

Joined: 02/10/09

Posts: 1219

RE: Pins & Needles
01/14/13 12:38 AM

Heavier barends, foam grips, and gel gloves. The main thing is your shoulders. Try different positions by rounding, relaxing your shoulders, straightening, bending your elbows. Sliding forward, backward in the seat. I found out my bars are too narrow, and sharply angled, causing my arms to twist and angle in, and putting a strain on my shoulders. I slide my hands out on the grips to the edge, only 2 fingers on the grip, and instant relief. You need to experiment with arm positions to find the right position for you. The "grip with your thighs" may work for most, but strained my back too much.



Before your criticize someone, walk a mile in their shoes. That way, when you do criticize them, you're a mile away and have their shoes.

Link | Top | Bottom

battleaxe


battleaxe's Gravatar

Location:

south shields. u.k

Joined: 02/09/09

Posts: 92

RE: Pins & Needles
01/14/13 1:50 AM

I had the same problem on my gen 2, so I've fitted an L S L conversion, it's covered on here somewhere,
B-A

Link | Top | Bottom

toledoUPSguy


toledoUPSguy's Gravatar

Joined: 06/17/12

Posts: 512

RE: Pins & Needles
01/14/13 8:48 AM

I have mentioned this ever since I got mine. Same time frame, 15-20 minutes. What is strange is if I break the habit of riding with my fingers covering the brake and clutch lever there is no issue at all. On mine, the grips are fine, the buzz is coming through the levers.



The man on top of the mountain didn't fall there.
2014 zx14r in nuclear sunset orange and black

Link | Top | Bottom

ZX14MAN64


ZX14MAN64's Gravatar

Joined: 08/17/12

Posts: 1237

RE: Pins & Needles
01/14/13 9:11 AM

I used to have pain in my palms, but was putting too much pressure on my palms.
Once I started holding my torso weight up with my abs and core
, it took the pressure off of my hands. You'd think having to support
your upper body with your abs would wear you out real quick,
but it don't. You get used to it real fast and the pressure is off
your hands and wrists. I workout 3-4 days a week and that probably helps, though.
Just my 2 cents. Good luck and hang in there.

Link | Top | Bottom

pegscraper



Location: UK

Joined: 05/04/12

Posts: 440

RE: Pins & Needles
01/14/13 11:55 AM

Engines vibrate, period. Every single IL4 I've ever owned has resonated through the bars at some point in the rev range. making sure the throttle bodies are balanced helps, as do gel palmed gloves but you'll never cure it 100%. It's the nature of the beast. The 1198 I ran for a while resonated just about everywhere but, being a twin, it was more of a throb than a buzz so never really caused the same discomfort.

Link | Top | Bottom

martin61


martin61's Gravatar

Location:

Brisbane, Australia

Joined: 11/03/12

Posts: 197

RE: Pins & Needles
01/14/13 8:41 PM

Thanks again everyone for their imput.
Im sure there is a fix for me in amongst all your susgestions.
Just gotta weed it out now.

Dave



2013 Limited Edition, Brocks lowering links, Lowered 1" front & back, Puig carbon hugger,
Akropovic Headers, Leo Vince EVO2 carbon twin exhaust system, Radguard protector, Tinted Tail Light,
Zero Gravity DB screen, BMC air filter, Driven D-Axis grips, Full PIAA lights, Rated R 1" bar risers,
Stem GPS mount, 12v outlet, Rated R frame sliders, Carbon heel guards, Custon rear fender, Seat Cowel,
Custom shaped seat, Brocks billet Adj Sidestand, Custom ECU tune by Oz-Racing, HyperPro RSC Active Damper.

Link | Top | Bottom

Grn14


Grn14's Gravatar

Location: Montana

Joined: 02/25/09

Posts: 15511

RE: Pins & Needles
01/14/13 8:45 PM

You could always see the doc..and have em do a carpal tunnel syndrome operation...it's quick and actually works!Also quite safe...even if you don't have carpal tunnel;)...maybe give ya two for one special...who knows!

My right hand...on the 14R...it would sometimes begin to display those symptoms.Heli risers fixed that for me...but interestingly...the LEFT hand never did it.....I broke it years ago and they went and did that operation on me so later on I wouldn't develop carpal tunnel.Coincidence?IDK


* Last updated by: Grn14 on 1/14/2013 @ 8:49 PM *

Link | Top | Bottom

Bigwimp



Joined: 09/02/12

Posts: 5

RE: Pins & Needles
01/16/13 1:28 AM

Hey pally, be careful with that. I have "pins and needles" in just my 4th and fifth digits. I get the sensation after using my computer, riding and stuff like that for a while. It ended up being cubital tunnel syndrome (ulnar nerve slipped out of place). Anyways there are exercises you can do if thats the prob so you dont need surgery. If it persists though, Id speak to your doc. Good luck!

Link | Top | Bottom

martin61


martin61's Gravatar

Location:

Brisbane, Australia

Joined: 11/03/12

Posts: 197

RE: Pins & Needles
03/09/13 2:10 AM

I have got a fair bit of relief now from this problem.
I took some of your susgestions as in riding, shoulders & arm positioning, also changed to gel grips.
Tried "grip Puppies" over them but they were to firm & made the grips to thick, so I came up with this idea.
I went to the local sports shop & purchased a Reebok cricket bat grip made from good quallity rubber which was supposed to reduce vibration on a cricket bat, they are long enough to cut in half & do the 2 sides, they are nice and thin & have very good grip.
They were a nice snug fit but I applied a little grip glue to make sure they stayed put.
They have made a big difference & would recomend to anyone with pins & needles problem.



2013 Limited Edition, Brocks lowering links, Lowered 1" front & back, Puig carbon hugger,
Akropovic Headers, Leo Vince EVO2 carbon twin exhaust system, Radguard protector, Tinted Tail Light,
Zero Gravity DB screen, BMC air filter, Driven D-Axis grips, Full PIAA lights, Rated R 1" bar risers,
Stem GPS mount, 12v outlet, Rated R frame sliders, Carbon heel guards, Custon rear fender, Seat Cowel,
Custom shaped seat, Brocks billet Adj Sidestand, Custom ECU tune by Oz-Racing, HyperPro RSC Active Damper.

Link | Top | Bottom

leo167


leo167's Gravatar

Location: SINY

Joined: 01/29/12

Posts: 213

RE: Pins & Needles
03/09/13 6:01 AM

Martin..
Is Your bike the special edition?
Looks like the covers between the tank and fairing are painted, and not the usual unpaintedlastic bits
Not unless I'm not seeing that on the picture correctly
If so I think I will order a set if available on the US



Black 2012 ZX14R......... Sold
13 Ducati Diavel Dark

Link | Top | Bottom

martin61


martin61's Gravatar

Location:

Brisbane, Australia

Joined: 11/03/12

Posts: 197

RE: Pins & Needles
03/09/13 6:17 AM

Hi leo167
Yes mate it is the 2013 limited edition model



2013 Limited Edition, Brocks lowering links, Lowered 1" front & back, Puig carbon hugger,
Akropovic Headers, Leo Vince EVO2 carbon twin exhaust system, Radguard protector, Tinted Tail Light,
Zero Gravity DB screen, BMC air filter, Driven D-Axis grips, Full PIAA lights, Rated R 1" bar risers,
Stem GPS mount, 12v outlet, Rated R frame sliders, Carbon heel guards, Custon rear fender, Seat Cowel,
Custom shaped seat, Brocks billet Adj Sidestand, Custom ECU tune by Oz-Racing, HyperPro RSC Active Damper.

Link | Top | Bottom

leo167


leo167's Gravatar

Location: SINY

Joined: 01/29/12

Posts: 213

RE: Pins & Needles
03/09/13 7:32 AM

Kool thanks, if you can, can you post a pic of the cockpit area, I like the painted side covers



Black 2012 ZX14R......... Sold
13 Ducati Diavel Dark

Link | Top | Bottom

martin61


martin61's Gravatar

Location:

Brisbane, Australia

Joined: 11/03/12

Posts: 197

RE: Pins & Needles
03/09/13 8:18 AM

@leo167
This is the best I can do atm with the light, 1am here.

Here is a link for the side covers if you are interested:

http://www.ebay.com/itm/2012-2013-KAWASAKI-ZX14R-ZX14-ZX-14R-NEW-GREEN-OEM-PAIR-FIN-GRILL-FAIRING-/400422506739?pt=Motorcycles_Parts_Accessories&hash=item5d3b0a90f3



2013 Limited Edition, Brocks lowering links, Lowered 1" front & back, Puig carbon hugger,
Akropovic Headers, Leo Vince EVO2 carbon twin exhaust system, Radguard protector, Tinted Tail Light,
Zero Gravity DB screen, BMC air filter, Driven D-Axis grips, Full PIAA lights, Rated R 1" bar risers,
Stem GPS mount, 12v outlet, Rated R frame sliders, Carbon heel guards, Custon rear fender, Seat Cowel,
Custom shaped seat, Brocks billet Adj Sidestand, Custom ECU tune by Oz-Racing, HyperPro RSC Active Damper.

Link | Top | Bottom

carabuser


carabuser's Gravatar

Joined: 09/05/12

Posts: 1731

RE: Pins & Needles
03/09/13 10:48 AM

I'm looking for some painted inners too, my bike is candy plasma blue, havent found any of those yet, I quess I could go with a metallic black ?



2012 ZX 14R, Cblast ECU Flash, (RECOMENDED !!!!) 2 Brother slipons, ZG marc 1 windscreen, yosh fender eliminator, Pazzo Levers, Powerbronze hugger, heli bars, competition werks footpegs, Throttlemeister Cruise Control, CF Heel Guards,

Predator Race Team #14
Hayabusa
1980 GS 1100
1978 GS 550
1968 CL 350
1972 TS 90
RM 125, YZ 250, CR 500. Taco 22 LOL !

"Socialism is a philosophy of failure,
the creed of ignorance, and the gospel of envy,
its inherent virtue is the equal sharing of misery.."
Winston Churchill

'The trouble with Progressive's is not that they're ignorant; it's just that they know so much that isn't so.' - Paraphrase of R.R.

Link | Top | Bottom

martin61


martin61's Gravatar

Location:

Brisbane, Australia

Joined: 11/03/12

Posts: 197

RE: Pins & Needles
03/09/13 4:21 PM

@carabuser
If you send this guy an email im sure he will help you out with your blue ones.

http://www.ebay.com/sch/m.html?item=181084897984&_sacat=0&_from=R40&_ssn=partsdepotstore&_nkw=zx14&rt=nc



2013 Limited Edition, Brocks lowering links, Lowered 1" front & back, Puig carbon hugger,
Akropovic Headers, Leo Vince EVO2 carbon twin exhaust system, Radguard protector, Tinted Tail Light,
Zero Gravity DB screen, BMC air filter, Driven D-Axis grips, Full PIAA lights, Rated R 1" bar risers,
Stem GPS mount, 12v outlet, Rated R frame sliders, Carbon heel guards, Custon rear fender, Seat Cowel,
Custom shaped seat, Brocks billet Adj Sidestand, Custom ECU tune by Oz-Racing, HyperPro RSC Active Damper.

Link | Top | Bottom

carabuser


carabuser's Gravatar

Joined: 09/05/12

Posts: 1731

RE: Pins & Needles
03/10/13 11:32 AM

Thanks martin,

I will check it out !



2012 ZX 14R, Cblast ECU Flash, (RECOMENDED !!!!) 2 Brother slipons, ZG marc 1 windscreen, yosh fender eliminator, Pazzo Levers, Powerbronze hugger, heli bars, competition werks footpegs, Throttlemeister Cruise Control, CF Heel Guards,

Predator Race Team #14
Hayabusa
1980 GS 1100
1978 GS 550
1968 CL 350
1972 TS 90
RM 125, YZ 250, CR 500. Taco 22 LOL !

"Socialism is a philosophy of failure,
the creed of ignorance, and the gospel of envy,
its inherent virtue is the equal sharing of misery.."
Winston Churchill

'The trouble with Progressive's is not that they're ignorant; it's just that they know so much that isn't so.' - Paraphrase of R.R.

Link | Top | Bottom


Welcome to zx14ninjaform.com!
 
New Topic Reply
Next Page

Page: 1 2

Previous Page

New Post

Please login to post a response.