So I had my swingarm break on me and it caused my tail to sit on my tire and rub a whole in my relay box it popped the 30amp fuse and rubbed a hole in some wires I got a new relay box and undertail and repaired the wiring and replaced all the fuses but for some reason my fuel pump is not getting power on the red and white wire if I put power to it from the battery the fuel pumps kicks on its not getting power from the ecu and the new relay box do i need a new ecu or is there something else

Check the other fuse at the 30a fuse relay.
Kill switch off?
What's the code number if no joy at the fuel pump.

And get that swingarm pivot torqued if that is an 06-07 ZX-14. They recalled for that.

So I've never heard of a swing arm breaking before, I thought they were some pretty hefty pieces of well engineered metal. The rear shock mount failing would make more sense to me than the swing arm itself (maybe that's what he was referring to?) as if the arm broke I would imagine the rear tire getting pulled towards the chain and all sorts of bad stuff happening after that...

Hey , Could Someone help me with an issue I'm having. I have a 2012 ZX14r and as I am riding it and I give it gas , it ask like it doesn't want to take it. I have change the plugs , Fuel filter and pump , I also change the oil. I put everything back together and it fixed the problem. when I took the filter off it was trash in it ( grey Matter ) it look like the top of the gas cap. So I started my investigation and took the gas cap off and it was nasty inside so I replaced it so I'm thinking problem solved. The bike was running fine for a couple of days now its doing it again.

Please I want to ride and I need some help.

I'm having the same issue I got a fault code 23 camshaft sensor, the fuel gauge flashes back and forth between full and empty. On my fuel pump plug I have one constant 12 volt and the ground has good continuity but one of them is supposed to come on for a few seconds and show voltage and go off and it's not I've replaced everything on this bike including the wiring harness The ECU I bought used and the relay box I bought used I even bought a new camshaft sensor and it still showing the same thing even though I've tested the camshaft sensor it works anybody has any idea what's going on this thing I'm sure appreciate a tip cuz I'm about ready to set this son of a b**** on fire