Since re-adjusting the pop-off valve on the airbox to be shut at idle, I am getting a whole mess of oil coming outta my crank case vent hose. Now this hose was been extended to right beside the left intake on the air box, beside the pop-off valve, and a small K-N put on it.
Before the adjustment to the pop off valve, after hunderds of miles of riding I'd have just a tad of oil film on surrounding stuff. Of coarse the pop off was bleeding off pressure when it shoulda been closed.
now oil is blowing up out of the crank case hose under higher PSI and is getting all over, in a short ride.
Any ideas would be appreciated.
* Last updated by: JDC on 4/6/2009 @ 2:02 PM *