What HIDS and running lightsare you running cause they are the exact look I was going for? looks awesome. Also, What wattage and Kelvin are they? did you get yours from ddm? If so, what kit?

lol check the other thread I posted some pics there >>>>
https://zx14ninjaforum.com/messages.cfm?threadid=69839B89-D56B-84E2-1EBF50CC3AC2A4E8&page=1

* Last updated by: AWDTurbo4 on 1/31/2010 @ 11:20 PM *

Thanks for replying Turbo That link isnt working sorry to be a bother...

dr just go to the search button up top and type in hids

I Have and although the site has alot of info that is helpfull ecspecially the HIDS thread, but there seems to be a problem when people want really bright white, like myself, but I hear ppl talk about DDM and other sites not pulling through like their supposed too. They ordered what they thought what very bright white, but it is blue or a blueish tint. I want very clean bright white. If anyone could tell me what 55 watt kelvin to get ie. 5k 6k...... that would be awesome and I would love you forever...... not really..lol, but i would appreciate it thanks.

This is your brightness chart.Your 5000k is gonna be yer whitest. I must say though-I can't remember if mine are 5000k or 6000k.They do the job though.People WILL see you.These are DDM's.I'm "pretty sure" mine are 5000k.65watt high beams(in both high and low sockets).

* Last updated by: blue07 on 2/1/2010 @ 2:29 PM *

they have 65 i thought i only saw 55 and 35...? anyways ur looks awesome i will be looking that maybe 55watt 5k

is that chart 35 watt or 55 watt or 65 watt???

* Last updated by: DrHardin on 2/1/2010 @ 8:31 PM *

thats a 35 chart 5k would be good in 55w for white

Could be they are 55w-it's been a while since I installed em-all I know is they were the most wattage I could get-probably 55's.

* Last updated by: blue07 on 2/2/2010 @ 1:00 AM *

which kit did ya'll buy through DDM single, dual or single hi lo (I plan on doing both my highs and lo's) and what bulb type do i pick?? thanks for all the help ppl.

* Last updated by: DrHardin on 2/2/2010 @ 1:05 AM *

singles....duals are for if you have 1 light bulb that is both your highs and low beams. so you need a set of h9's for highs and a set of h11's for your lows...fyi when you get them dont go pulling everthing out of the boxes (bulbs) cause once you do that you wont be able to tell them apart keep em seperate lol

as far as wattage some on here have gotten the 55w bulbs i use the 35w mattr of preference just keep in mind if you use the 55's they run hotter and very important they wash out the color meaning if you like the blue tint at say 6000k they suggest buying the 8000k in the 55w bulbs

* Last updated by: scottjkyl on 2/2/2010 @ 4:34 AM *

So this is the set I get twice one set for lo's and one set for hi's???

click here

* Last updated by: DrHardin on 2/3/2010 @ 6:39 PM *

yep that would be them set of h9 and set of h11

awesome man appreciate it

pulled my fairings off today to install screens think while i have them off im gonna move my ballasts for the hids and mount them on the turn signal brackets if it works out ill snap some pics and post em for you. right now i have 2 of the ballast up behind the windscreen and the other 2 mounted to the ram air tubes

kewl definatly want to see that.

You can just put one set down inside your inner fairing NEXT to the turn signal area(right and left).Nice handy little "pouch" right there.You will need four ballasts,and four bulbs.Two H9's,Two H11's.You want the DUAL kit-(two).(one set h9's,one set H11's).They do have single sets-one ballast,one bulb.Basically,the DUAL is just easier to order,and "may" be cheaper than buying 4 singles.Regardless-you need 4 and 4(ballasts and bulbs).(probably saying the same thing Scott is saying).Just wanted you to be clear on how many of each you need.They don't have TWO bulbs being fired from ONE ballast).

* Last updated by: blue07 on 2/4/2010 @ 12:33 AM *

You mean UNFORTUNATLY they don't have 2 bulbs per ballast. I just purchased 2 of the dual kits from DDM (h9 and h11) will post pics of the build and the before and after when I put it in her.

Dr take your bike to a poorly lit road snap a pic with you oem lights then after the install go to same place and snap pis with hids then post your findings on here bet you will be pleasently surprised lol

I just ordered a pair of H9 and H11 both, in 35w and 6,000 from DDM Tuning. I still have to move the headlight nacels from the OEM upper fairing to the MDI carbon fiber piece. So it is a perfect time to put the HIDs in. Along with the LED marker bulbs I've had for months.

blue did you check out that carbon fiber tank cover on ebay that i posted it would go sweet with the rest of the c/f pieces you already have

I didn't Scott-but I will-thanks!Not so sure I'd like "just" the cover on there.???I would like to get CF lowers though-I think that would look really good.Okay-yes,I did look on there-good site Scott!I like that tank cover-looks good.Also those foremans-nice touch.

* Last updated by: blue07 on 2/4/2010 @ 8:45 AM *

blue, you look at this one

https://zx14ninjaforum.com/messages.cfm?threadid=8CA8EF52-D56B-84E2-1F88C96BCBE0FD20

Yep-very nice Scott.If I could get a CF TANK-THAT would be great!!!