I can any one tell me if they have fitted a complete new
Barnet clutch on 2013 zzr1400 and if it was any good

regardsjohnzzr

john.

If this is a race clutch, here is what I have been told: it will work good for racing where you remove the clutch plates immediately after every event. The fiber plates of a race clutch are cardboard. If you leave them in longer than one race event, they become saturated with oil and will fall apart if you try to use the clutch. I believe even most people who drag race stick with the OEM clutch but for street use, OEM is the only thing to consider using.

If your clutch is slipping, there are a couple good threads on this forum that deal with this. The clutch is normally good for the life of the bike on 14s unless you are unusually hard on it as in drag racing. I discovered that my clutch was slipping from using aftermarket levers that require to be cleaned and lubed very frequently.