I ordered from the local shop and it doesn't seem to be the same. I need the grommet that holds the plastic tank cover to the gas tank on the sides.

(Borrowing from Rooks Tutorial)

It is the top #5 in this picture;

And where Rook's pinky is in this picture;

It is the grommet that is actually IN the tank that the bolt grabs onto.

* Last updated by: caps on 4/1/2013 @ 7:10 AM *

I also just remembered I need the part number for the grommet in the tail light as well;

And the Water Pump Pad

* Last updated by: caps on 4/1/2013 @ 7:09 AM *

# 5 well nut for the tank is part# 92015 and bikebandit.com #858145

You have to take the part #s from BikeBandit schematics for what they are worth. I have gotten the wrong part a couple times from them by using those diagrams on the site.

i have recently been directed to these sites for lower priced OEM parts.

http://402bike.com/

 http://www.ronayers.com/

can get the same well nuts for a whole lot cheaper at your local ace hardware store

Tail light grommet is 92075-1011.
The well nuts on the fairing is 92015-1757.
The fastener that threads into the well nut is a 5x16 aluminum fastener, p/n 92153-1244.
The pad that encloses the coolant hose is 39156-0151.

92015-1757 well nut, $4.75
92153-1244 screw, $.88
39156-0151 pad, $8.74
92075-1011 grommet, $3.31

Hopefully these are accurate.

can get the same well nuts for a whole lot cheaper at your local ace hardware store

+1 ...and stainless steel metric cap screws for fairing bolts too but they will have a smaller head and smaller hex. A bit less expensive and right there when you need one. ...plastic washers at Ace too...or Lowe's.

Don't get hooked on Pro-Bolts or you will have a grand in aluminum and Ti fasteners on that bike before you know it.

You guys are awesome, I just ordered everything.