yo guys,

I found there were 2 one end connectors under seat as shown below. cdo you know what these connectors are for? many thanks for any help.

That appears to be the standard Kawasaki accessory 12v leads.

We don't have those on the Gen1.

Unless maybe that's a Euro/Cali.

All bikes from 2016 had those fitted.

There is a matching pair in the black rubber boot under the LHS air intake cover.

Ignition controlled, marked on the fuse box as ACC with a 2a fuse.

Cheers, mate. Can I connect the header with SAE cable with USB port directly? @Enzo200500

* Last updated by: Alom on 2/10/2021 @ 9:22 PM *

Anything that does not draw more than the 2a fuse rating will be fine.

We always use them for GPS and USB charging points.

The ones under the rubber boot might be easier for wiring to if you are needing power up front?

Black with yellow tracer is always the earth or -VE cable on these bikes.

* Last updated by: Enzo200500 on 2/15/2021 @ 8:25 AM *

@Enzo200500

Cheers, mate.

No problem sir!